Electric Vehicle ALTILIUM

- Motorhaus Garage has engaged in new energy vehicle drive system.
- With a strong engineering team and successful cases, applied to a variety of our
kits and specific designed project kits."
The drive system includes the following:
1. Motor: Low voltage AC from 2KW~20KW, PMSM from 20KW~85KW, complete categories;
2. Rear axle: speed ratio 6:1, 8:1,10:1,12:1, 16:1,21:1,25:1, etc. Support customization, load 300KG~3000KG, to meet the load bearing of various models;
3. Gear box: speed ratio 6:1,8:1,10:1,12:1,16:1 support customization;
4. Controller: including line speed, current 100A~750A, to meet the load of various models, programmable;
5. Charger: lithium battery, lead acid charger complete variety, support CAN protocol, meet the global voltage and plug standards;
6. DC: meet the conversion between various voltages, complete varieties;
7. Accelerator: including hand accelerator, plastic accelerator, metal accelerator, thumb accelerator, etc.
8. Instrument: lithium battery, lead acid instrument variety is complete, support CAN protocol, meet a variety of speed, voltage, quantity display; 9. Emergency switch;
10. Left and right axis: length can be customized to meet various needs;
11. Brake pump;
12, EPS;
13. Gear position:
14. Air conditioning system,
15. Tire;
16. Steering system;
17. Front suspension system;
18, battery: lithium battery, lead acid battery, complete varieties.
XERO4 will be a 4wheel drive system and will be for a sporty ride
XERO2 for now will be a hot hatch but designed for the daily driver. But with Class and presence.
XERO4

1. 4pc x RAQSMOTOR 273 8000W 273 50H V3 E-Car
Hub Motor
2. 4pc x RAAPT96600
controller
3. 1pc x X8-E Speedometer
4. 1pc x 0-5V Electric Car
Throttle Pedal
5. 4pc x Disc
6. 1pc x DNR gear switch
7. 1pc x DC DC converter 96V
XERO2

1. 2pc x RAQSMOTOR 273 8000W 273 50H V3 E-Car
Hub Motor
2. 2pc x RAAPT96600
controller
3. 1pc x X8-E Speedometer
4. 1pc x 0-5V Electric Car
Throttle Pedal
5. 2pc x Disc
6. 1pc x DNR gear switch
7. 1pc x DC DC converter 96V
Item: RAQSMOTOR 8000W 273 V3 Electric Car Single Shaft In Wheel Hub Motor
SPEC
* Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor With Hall Sensor
* Brand: RAQS Motor, RAQSMOTOR
* Motor Design: Single axle without rim
* Matched Wheel: ≥14inch Car Wheel, PCD customizable, CB ≥60mm (PCD 5*112mm, CB60mm as
default)
* Stator: Aluminium Core
* Rated Power: 8000W (19000kW peak in few seconds)
* Rated Voltage: 96/72/48V
* Speed:1200RPM/930RPM/627RPM no load, approx 120km/h@96V 95km/h@72V 67km/h@48V
* kV: 12.5kV
* Max Torque: approx 350N.m
* Max Efficiency: approx 88%
* Continuous Battery Current: 132 A (96V) 120 A (72V) 80A (48V)
* Peak Battery Current: 180A (96V) 200-250A (72V) 250A (48V)
* Suggest Peak Phase Current: 591A
* Thermic Probe: KTY83/122 (as default, optional)
* Working Temperature: 70-120℃ , peak 150 ℃
* Brake type: Car Disc brake, PCD 4*114.3mm, M12(as default)
* Dual Hall Set with waterproof connectors
* 16mm² Cross Section of Phase Wire (not include insulation layer)
* Hall Sensor Phasing angle: 120 degree
* Waterproof Grade: IP65
* Colour: Black
* N.W./G.W.: approx 23.0/24.7kg (TBD




