Electric Vehicle ALTILIUM

MOTORHAUS GARAGE HAS ENGAGED IN A NEW ENERGY VEHICLE DRIVE SYSTEM APPLIED TO A VARIETY OF OUR KITS AND SPECIFICALLY DESIGNED PROJECT KITS

The drive system includes the following:

1.Motor: Low voltage AC from 2KW~20KW, PMSM from 20KW~85KW, complete categories;

2. Rear axle: speed ratio 6:1, 8:1,10:1,12:1, 16:1,21:1,25:1, etc. Support customization, load 300KG~3000KG to meet the load bearing of various models;

3. Gearbox: speed ratio 6:1, 8:1, 10:1, 12:1, 16:1, supports customisation;

4. Controller: including line speed, current 100A~750A, to meet the load of various models, programmable;

5. Charger: lithium battery, lead acid charger complete variety, support CAN protocol, meet global voltage and plug standards.

6. DC: meet the conversion between various voltages, complete varieties;

7. Accelerator: including hand accelerator, plastic accelerator, metal accelerator, thumb accelerator etc.

8. Instrument: lithium battery, lead acid instrument, variety is complete, support CAN protocol, meet a variety of speed, voltage & quantity display

9. Emergency switch;

10. Left and right axis: length can be customised to meet various needs;

11. Brake pump

12, EPS; 

13. Gear position: 

14. Air conditioning system, 

15. Tyre;

16. Steering system;

17. Front suspension system;

18. Battery: lithium battery, lead acid battery, complete varieties

XERO4 will be a 4-wheel drive system and will be for a sporty ride
XERO2 for now will be a hot hatch but designed for the daily driver, but with class and presence.

XERO4

1. 4pc x RAQSMOTOR 273 8000W 273 50H V3 E-Car Hub Motor
2. 4pc x RAAPT96600 controller
3. 1pc x X8-E Speedometer
4. 1pc x 0-5V Electric Car Throttle Pedal
5. 4pc x Disc
6. 1pc x DNR gear switch
7. 1pc x DC converter 96V

XERO2

1.2pc x RAQSMOTOR 273
2. 8000W 273 50H V3 E-Car
3. Hub Motor
4. 2pc x RAAPT96600
5. controller
6. 1pc x X8-E Speedometer 1pc x 0-5V Electric Car Throttle
Pedal

7. 2pc x Disc

8. 1pc x DNR gear switch

9. 1pc x DC converter 96V

 

Item: RAQSMOTOR 8000W 273 V3 Electric Car Single Shaft In Wheel Hub Motor
SPEC
* Motor Type: BLDC Permanent Magnet Outer Rotor In-Wheel Hub Motor With Hall Sensor
* Brand: RAQS Motor, RAQSMOTOR
* Motor Design: Single axle without rim
* Matched Wheel: ≥14inch Car Wheel, PCD customizable, CB ≥60mm (PCD 5*112mm, CB60mm as default)
* Stator: Aluminium Core
* Rated Power: 8000W (19000kW peak in few seconds)
* Rated Voltage: 96/72/48V
* Speed:1200RPM /930RPM/627RPM no load, approx 120km/h@96V 95km/h@72V 67km/h@48V
* kV: 12.5kV
* Max Torque: approx 350N.m
* Max Efficiency: approx 88%
* Continuous Battery Current: 132 A (96V) 120 A (72V) 80A (48V)
* Peak Battery Current: 180A (96V) 200-250A (72V) 250A (48V)
* Suggest Peak Phase Current: 591A
* Thermic Probe: KTY83/122 (as default, optional)
* Working Temperature: 70-120℃ , peak 150 ℃
* Brake type: Car Disc brake, PCD 4*114.3mm, M12(as default)
* Dual Hall Set with waterproof connectors
* 16mm² Cross Section of Phase Wire (not include insulation layer)
* Hall Sensor Phasing angle: 120 degree
* Waterproof Grade: IP65
* Colour: Black
* N.W./G.W.: approx 23.0/24.7kg (TBD)